 |
| Quantity: | |
|---|---|
XM-TGR1282
XIMI
The plastics industry is the second largest user. Adding titanium dioxide to plastics can improve the heat resistance, light resistance and weather resistance of plastic products, improve the physical and chemical properties of plastic products, enhance the mechanical strength of products and prolong the service life.
Safe White Titanium Dioxide XM-TGR1282:
| Model No | XM-TGR1282 |
| TiO2 content % | ≥94 |
| Matter volatile at 105°C % | ≤0.8 |
| Hydrotrope % | ≤0.5 |
| Residue on sieve 45 μm % | ≤0.02 |
| Color compare with standard | Not lower than |
| Tinting strength compare with standard % | ≥112 |
| PH of suspension, aqueous solution retainted | 6.5-8.5 |
| Oil absorption g/100g | ≤20 |
| Resistivity of aqueous extract Ωm | ≥80 |
| Rutile crystal form conversion % | ≥98 |
| Average particle diameter μm | 0.20-0.26 |
| Inorganic coating | Zirconium-Aluminium |
| Organic treatment | Yes |
The plastics industry is the second largest user. Adding titanium dioxide to plastics can improve the heat resistance, light resistance and weather resistance of plastic products, improve the physical and chemical properties of plastic products, enhance the mechanical strength of products and prolong the service life.
Safe White Titanium Dioxide XM-TGR1282:
| Model No | XM-TGR1282 |
| TiO2 content % | ≥94 |
| Matter volatile at 105°C % | ≤0.8 |
| Hydrotrope % | ≤0.5 |
| Residue on sieve 45 μm % | ≤0.02 |
| Color compare with standard | Not lower than |
| Tinting strength compare with standard % | ≥112 |
| PH of suspension, aqueous solution retainted | 6.5-8.5 |
| Oil absorption g/100g | ≤20 |
| Resistivity of aqueous extract Ωm | ≥80 |
| Rutile crystal form conversion % | ≥98 |
| Average particle diameter μm | 0.20-0.26 |
| Inorganic coating | Zirconium-Aluminium |
| Organic treatment | Yes |
